- Vacuum tube no pressure solar water heater
Categories Unpressurized Solar Water Heater Album View larger image Brand Inlightsolar Model ILNA Type Evacuated Tube Pressure Unpressurized Circulation Type Indirect / Closed Loop (Active) Heating System Thermosyphon (Passive) Connection Type Direct-Plug Installation Freestanding Housing Material Other Certification CE, ISO9001 Capacity 250 services can help you with the design Unit Price US $ 100-400 / set Update Time 2020-04-10Detail Information
No pressure solar water heater
Φ47×1500 Φ58×1800 Φ70×2000
15 / 16 / 18 / 20 / 24 / 30 / 36
Borosilicate glass, magnetron spluttering selective coating
AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN
100 ~ 500L for inner water tank
Food-grade stainless steel SUS304-2B
Imported polyurethane integrated foam-forming 50~60mm
Color steel plate
1.2 ~ 1.5mm in thickness
Hot-dip galvanized steel plate
Stainless bolts & nuts, Silicon rubber seal, Dustproof rubber seal, Plastic pipe holder
Electrical heater, Intelligent controller / Assistant tank, Anod magnesium bar
Non-pressurized solar water heater is such kind of a most economical system with high efficiency at the same time. It works depending on the gravity of water, so it's much better to be installed on the slope or flat roof as top as possible to get enough hydraulic pressure. A simple assistant tank can be equipped for tap water refill automatically or with an intelligent controller to control the startup of auxiliary heating device at the same time.
Vacuum tube: Hail-resisting borosilicate glass with high-tech selective coating ensures an efficient solar collecting, tri-target vacuum tube with its patent interference coating makes the efficiency not only improved by 12% but also with a high temperature resistantce (380oC).
Inner water tank: Food-grade stainless steel SUS304-2B as inner tank keeps the water clean and drinkable, together with advanced welding technics to ensure it with a long lifespan (15 years).Water tank shell: Imported color steel plate, with its outer coating treatment ensures a long life even to ocean coast weather.
Insulation Layer: Germany-imported polyurethane integrated foam-forming with twice slaking treatment, preserves hot water constantly as long as 70~80 hours.
Supporting Bracket: Hot-dip galvanized steel plate with a good weight bearing and wind resistance(140 km/hr), super mechanical performance and corrosion resistance ensures a long life to ocean coast, easy installation, universal bracket suitable for either flat or slope roof installation.
Accessories: Stainless bolts & nuts, water-proof silicon rubber, anti-aging dustproof rubber seal, plastic pipe holder and ventilating cap to ensure their lives as long as other parts of the system
Assistant tank, to automatically feed tap water into storage tank to keep it sufficient always
Electrical heater, as an auxiliary heating element in case of raining or snowing days so as to ensure a continous hot water supply
Intelligent controller, automatically controls water refill and startup of auxiliary heating device, more intelligent operation
Booster Pump, a choice for those area without tap water or with a unstable water supply
Warranty: 3 years international responsibility for integrated system and 15 years for glass vacuum tubes due to original quality problemsRelated Products