Home > Products > Solar Vacuum Tube Series > Unpressurized Solar Water Heater >

400L Split Non-pressure Solar Water Heaters

400L Split Non-pressure Solar Water Heaters

400L Split Non-pressure Solar Water Heaters
CategoriesUnpressurized Solar Water Heater
AlbumView larger image
BrandInlightsolar
TypeEvacuated Tube
PressureUnpressurized
Circulation TypeDirect / Open Loop (Active)
Heating SystemThermosyphon (Passive)
Connection TypeSplit
InstallationFreestanding
Housing MaterialColor steel
CertificationCE, Solar keymak,SRCC,INMETRO,ISO9001:2008
Capacity400
Main componentsWater tank,Vacuum tube solar collector,Assistant tank
Optional tank capacity300l,400l,500l,600l,1000l (Customized volume available)
Inner tank materialStainless steel 304-2B or 316
Heat preservation layerPolyurethane foam(PU foam)
Bracket materialAluminum alloy or stainess steel
Installing locationBoth Pitched roof and flat roof(groud)
Frost resistanceYes, > - 20°C
Hail resistanceYes, < dia 30mm
Unit PriceUS $ 200-500 / set
Update Time2019-03-23
Detail Information

Haining Yinuo electric Co., Ltd manufactures and supplies all kinds of solar water heaters, solar collectors.

Our professional group will design the best products and solutions for your domestic house, hotel, hospital or industry plants etc commercial purpose.

Contact us to get the professional advice and customized solutions freely.

 

Split non-pressure Solar Water Heaters  

 

Item No.Solar Vacuum TubeStorage TankTotalInsulation
Tube No.Size/mmCapacity/LCapacity/Lmm
ILN-5818G700S-50V50Φ58 * 180040055050
ILN-5818G700S-50V 60Φ58 * 180050067050
ILN-5818G700S-50V 100Φ58 * 1800800108050
ILN-5818G700S-50V 120Φ58 * 18001000134050
1. Inner Storage Tank: Food-grade stainless steel SUS304-2B 0.4mm-0.6mm
2. Tank Exterior Shell: High-quality stainless steel SUS304-BA or SUS304-2B 0.4mm
3. Heat Insulation: High-density polyurethane integrated foam-forming layer with 72~80 hours heat preservation
4. Vacuum Tube: Borosilicate glass vacuum tube, AL-N/AL or Cu-SS-AIN/ALN coating
5. Bracket: Aluminum alloy 1.5mm, universal bracket suitable for slope and flat roof installation
6. Optional Devices: Auxiliary tank, Electrical heater, Intelligent controller, Anode magnesium bar
7. Accessories: Stainless bolts & nuts, anti-aging silicon gasket, dustproof rubber seal, plastic air-vent cap
8. Angle of bracket: 20°-50°
9. Hot water Output: 45-95°C
10. Designed Pressure: 0.5 Bar
Remarks:        
1. Other outer tank diameter: Φ420mm, Φ470mm, Φ480mm,Φ500mm and 520mm    
2. Other optional vacuum tube model: Φ47 * 1500mm, Φ47 * 1800mm, Φ58 * 2000mm, Φ70 *2000mm  

 

 

More models information,  please contact me freely.

Julie Qin

Tel: 0086 -573-87706777; Fax: 0086-573-87218666

Mob: 0086-159 6830 7322 

400L Split Non-pressure Solar Water Heaters400L Split Non-pressure Solar Water Heaters400L Split Non-pressure Solar Water Heaters 

 

  

Related Products
Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
*Email
Tel
*Title
*Content

Agree to use terms of service