Home > Products > Solar Vacuum Tube Series > Split Pressure Solar Water Heater >

50 Gallon Hot Water Solar System

50 Gallon Hot Water Solar System
50 Gallon Hot Water Solar System
CategoriesSplit Pressure Solar Water Heater
AlbumView larger image
TypeEvacuated Tube
Circulation TypeIndirect / Closed Loop (Active)
Heating SystemThermosyphon (Passive)
Connection TypeSplit
Housing MaterialOther
Main componentsWater tank,Solar collector,Solar workstation
Tank capacity20 Gallon to 250 Gallon (Customized volume available)
Inner tank materialStainless steel SUS304 or 316L
Heat preservation layerPolyurethane foam(PU foam)
Solar collector typeHeat pipe solar collector
Bracket materialAluminum alloy
Install locationPitched roof,groud or wall or balcony mounting
Max working pressure7 bar (0.7MPa)
Frost resistanceYes, > - 40 C
Hail resistanceYes, < dia 30mm
Unit PriceUS $ 500-3000 / set
Update Time2020-04-09
Detail Information

Haining Yinuo electric Co., Ltd manufactures and supplies all kinds of solar water heaters, solar collectors.

Our professional group will design the best solar heating system solutions for your domestic house, hotel, hospital or industry plants.

Contact us freely to get the professional advice and customized solutions.


 Hot Water Solar System
1. Solar Water Heater Storage Tank Capacity: from 20 Gallon to 250 Gallon
2. Heat Collecting Type: Glass evacuated tube with copper heat pipe solar collector
3. Inner Storage Tank Material: Food-grade stainless steel SUS304-2B or SUS316L 1.0mm - 2.0 MM
4. Tank Exterior Shell Material: High-quality white coated color steel or stainless steel 0.4MM
5. Heat Insulation: High-density polyurethane integrated foam-forming layer with 72~80 hours heat preservation
6. Thickness of Insulation Layer: 50mm, 55mm, 60mm, 10mm
7. Coils in tank as heat exchanger in tank: Stainless steel, or copper coils
8. Quantity of coils in tank:1   roll,2 rolls,3 rolls or four rolls
9. Vacuum Tube Model: Φ47/1500mm, Φ47/1800mm, Φ58/1800mm
10. Vacuum Tube Material: Borosilicate glass 3.3
11. Vacuum Tube Absorbing Coating: Single or tripple target magnetron sputtering AL/AL-ALN or Cu-SS-ALN/AIN
12. Bracket: Hot-dip galvanized steel,stainless steel or aluminum alloy
13. Angle of bracket: 10°-50°, universal bracket suitable for slope and flat roof installation
14. Accessories: Stainless bolts & nuts, anti-aging silicon gasket, dustproof rubber seal, plastic air-vent cap
15. Hot Water Output:45-95°C
16. Designed Pressure:6 Bar



50 Gallon Hot Water Solar System(Solar Keymark SRCC Approved)50 Gallon Hot Water Solar System(Solar Keymark SRCC Approved)


Related Products
Please send your message to us

Agree to use terms of service