Home > Products > Solar Hot Water Heating System >

Passive Solar Industrial Stainless Steel Heater

Passive Solar Industrial Stainless Steel Heater
Passive Solar Industrial Stainless Steel Heater
CategoriesSolar Hot Water Heating System
AlbumView larger image
BrandInlightsolar
ModelILVC-VC14
Pipe typeVacuum Tube
Mainfold inner tankStainless steel SUS304-2B
Mainfold tank shellStainless steel SUS304-BA
ApplicationHotel,Hospital,Restuant,Factory,School
Unit PriceUS $ 1,000-20,000 / set
Update Time2020-03-29
Detail Information

 Industrial Stainless Steel Heater Technical Parameters:

  Vacuum tube

 Size (mm)

  Φ47×1500    Φ58×1800  

 Tube (pcs)

  40 / 50 / 60 / 70

  Material

  Borosilicate glass, magnetron spluttering coating

 Coating

  AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN

    Manifold

 Dimension

 180*160mm, 1” male thread inlet & outlet

 Inner tank

  Food-grade SUS304-2B stainless steel

 Tank shell

  Stainless steel SUS304-BA / SUS304-2B

 Insulation

  Imported polyurethane integrated foam-forming

    Bracket

  Stainless square tube steel 30*30*3mm

    Accessories

  Stainless bolts & nuts, waterproof silicon rubber seal,

  dustproof rubber seal, plastic pipe holder

     Tilt angle

  0°~ 90°

 Hail resistance

  Φ25mm diameter

 

 

Structure

Solar Hot Water Heating System consists of solar collectors, project storage tank, pipelines, controlling system, pumps and other accessories.

 

Working Principle:
1) Firstly, the storage tank shall be filled with cold water, the collector loop shall be pumped with water or heat exchange liquid 

2) The water or liquid in collector loop then will be heated with solar radiation to vacuum tubes

3) When temperature discrepancy sensed between solar collector and storage tank reaches set value in controller, the controller shall start the circulation pump automatically
4) The circulation pump makes water circulate in the loop for heat exchange between water tank and collector
5) In case the temperature in storage tank does not reach set value you want, then the auxiliary electrical heater would start to assist heating
6) When temperature discrepancy sensed between solar collector and storage tank is below the set value in controller, the circulation pump shall stop automatically

7) If the water temperature has not reached the expected value set in the controller, then the auxiliary heating device would start to assist solar water heating

8) Eventually the water in storage tank will get heated enough as expected ready for use

 

Features:

1. Especially for large-scale hot water heating system, supplying hot water for apartments, hotels, restaurants, schools, hospitals, factories, swimming pools, and other places requiring large amount hot water use.

2. Very efficient and of good performance for a 15 years lifespan

3. Adaptable to different architecture structure installation

4. Anti-freezing system with good insulation to the pipelines

5. Easy installation and connection of solar collectors and pipelines

6. Able to be disigned to work with axuiliary heating devices to assist solar water heating

 

 

Passive Solar Industrial Stainless Steel Heater

Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service