Home > Products > Solar Vacuum Tube Series > Heat Pipe Solar Collector >

Sloping Roof Mounting Solar Collector(58/1800mm)

Sloping Roof Mounting Solar Collector(58/1800mm)
Sloping Roof Mounting Solar Collector(58/1800mm)
CategoriesHeat Pipe Solar Collector
AlbumView larger image
ApplicationSolar Thermal
Pipe MaterialGlass
Collector typeTubular solar collector
Vacuum tube model58/1800mm
Tube quantityFrom 10 tubes to 35 tubes
Manifold materialAluminum alloy
Insulation layerRockwool or polyurethane foam
Support materialAluminum alloy
Heat conductive pipeHigh quality copper pipe
Working pressure6 bar (0.6MPa)
Unit PriceUS $ 100-500 / set
Update Time2020-04-07
Detail Information

Sloping Roof Mounting Solar Collector



1. With special copper heat pipes,rapid heat transfer,more reliable,higher efficient

2. Perfect appearance anti-freeze,can be used in extreme cold area

3. No water in the vacuum tubes,even one glass vacuum tube broke,the whole system still can work as usual,no leakage

4. Can be connected with high pressure water pipe directly(max working pressure reach to 700 kPa)

5. Solar collector and storage tank is seperated installation

6. Pretty free installation of solar collector and storage tank according to building.

7. Easy plug-in installation and free maintenance


Yinuo heat pipe solar collectors have wide applications

1. Hotels, resorts, hospitals and hostels

2. Process industry, boiler feed, laundry and canteens

3. Agricultural sector, hatcheries and dairies

4. Boiler feed, Laundry and canteens

5. Agricultural sector, hatcheries, and dairies

6. Swimming pool heating

7. In-process heating 8. Health clubs




Item No.Solar Heat-pipe TubeCollector SizePackingContainer Loading Sets
Tube Nos.Tube Size/ mmL*W (mm)Volume/cbm20GP40GP40HQ
Specification details:
1. Direct-flow Header: High quality red copper Φ35*1.0mm, inlet & outlet Φ22mm
2. Manifold Shell: High-quality black/ gray aluminum alloy 2mm
3. Insulation: High-density compression-moulded rockwool 50mm
4. Heat-pipe Tube: Three-target coated vacuum tube, Φ14mm copper condensor, Aluminium fin, silicon seal
5. Mounting Frame:aluminum alloy 1.8mm, universal bracket suitable for roof or exterior wall installation
6. Accessories: Thermal paste,copper connectors
7. Working Pressure: 6.0 Bar
8. Collector Tilt Angle: 20°~90°(Vertical/ horizontal shift: -5°/-5°)
9. Hail Resistance: < Φ30 mm
10. Anti-freezing: > - 40°C
11. Optional device: Reflector,stainless steel or aluminum sheet



Sloping Roof Mounting Solar Collector(58/1800mm)

Please send your message to us

Agree to use terms of service