Home > Products > Solar Vacuum Tube Series > Heat Pipe Solar Collector >

copper heat pipe solar collectors

copper heat pipe solar collectors

copper heat pipe solar collectors
CategoriesHeat Pipe Solar Collector
AlbumView larger image
BrandInlightsolar
ModelILHC-0601
TypePressurized
ApplicationWater Heater
Pipe Materialcopper and vacuum tube
applicationwater heating and house heating
Unit PriceUS $ 100-500 / set
Update Time2019-10-14
Detail Information

 

 

 

 copper heat pipe solar collectors 

 

1.Technical Parameters

  

   Heat  Pipe 

  Vacuum Tube

 Size (mm)

  Φ47×1500    Φ58×1800  

 Tubes (pcs)

  12 / 15 / 20 / 25 / 30

 Material

  Three-target vacuum tube, red copper heat pipe, aluminum fin

 Coating

  Cu/SS-ALN(H)/SS-ALN(L)/ALN

   Pressurized

     Manifold

 Flow passage

  High-quality red copper Φ35*1.0mm

 Outer shell

  Aluminum alloy plate 2mm

 Insulation

  Processed high-density rockwool/ polyurethane

    Bracket

 Aluminum alloy 1.8~2.0mm

   Accessories

 Stainless bolts & nuts, dustproof rubber seal, plastic tube holder

 Working Pressure

 6.0-9.0 bar

    Tilt Angle

 25°~ 90° (-5° upright or level shift)

 Hail Resistance

 Φ25mm diameter

   Anti-freezing

 ≤ (-)40°C

------------------------------------------------------------------------------------------------------------------------------------------------------------------  

2. Heat-pipe Solar Collector Features description:

The heat pipe solar collector consists of heat pipe glass vacuum tube, pressurized manifold, supporting bracket and other related accessories

1) Solar heat pipe and its inner medium for thermal conduction, with a quick start and super daily efficiency about 55% in summer and 42% in winter, much more than that of the all-glass tube 

2) The flow passage is inner closed and pressurized, no water or medium goes through glass vacuum tubes, no freeze to break vacuum tubes, able to serve in extremely cold weather

3) Heat pipe tip is inserted into a closed cannula welded into the copper flow passage, collector works well even withdrawal one or several heat pipe vacuum tubes

4) Aluminum alloy as bracket with super performance in chemical resistance, universal bracket suitable for slope and flat roof installation

5) Modularized collector, arbitrary combination with any architectural structure, adaptable to either slope roof or flat ground or upright walls, almost maintenance free collector

Warranty:  

3 years international responsibility for solar collector and 15 years for glass tubes due to original quality problems

 

------------------------------------------------------------------------------------------------------------------------------------------------------------------  

 3.Heat-pipe solar collector  Installaion pictures:

 

Pressure Heat-pipe Solar Collector, contact sales4(-at-)inlightsolar.com

1.Technical Parameters

  

   Heat  Pipe 

  Vacuum Tube

 Size (mm)

  Φ47×1500    Φ58×1800  

 Tubes (pcs)

  12 / 15 / 20 / 25 / 30

 Material

  Three-target vacuum tube, red copper heat pipe, aluminum fin

 Coating

  Cu/SS-ALN(H)/SS-ALN(L)/ALN

   Pressurized

     Manifold

 Flow passage

  High-quality red copper Φ35*1.0mm

 Outer shell

  Aluminum alloy plate 2mm

 Insulation

  Processed high-density rockwool/ polyurethane

    Bracket

 Aluminum alloy 1.8~2.0mm

   Accessories

 Stainless bolts & nuts, dustproof rubber seal, plastic tube holder

 Working Pressure

 6.0-9.0 bar

    Tilt Angle

 25°~ 90° (-5° upright or level shift)

 Hail Resistance

 Φ25mm diameter

   Anti-freezing

 ≤ (-)40°C

------------------------------------------------------------------------------------------------------------------------------------------------------------------  

2. Heat-pipe Solar Collector Features description:

The heat pipe solar collector consists of heat pipe glass vacuum tube, pressurized manifold, supporting bracket and other related accessories

1) Solar heat pipe and its inner medium for thermal conduction, with a quick start and super daily efficiency about 55% in summer and 42% in winter, much more than that of the all-glass tube 

2) The flow passage is inner closed and pressurized, no water or medium goes through glass vacuum tubes, no freeze to break vacuum tubes, able to serve in extremely cold weather

3) Heat pipe tip is inserted into a closed cannula welded into the copper flow passage, collector works well even withdrawal one or several heat pipe vacuum tubes

4) Aluminum alloy as bracket with super performance in chemical resistance, universal bracket suitable for slope and flat roof installation

5) Modularized collector, arbitrary combination with any architectural structure, adaptable to either slope roof or flat ground or upright walls, almost maintenance free collector

Warranty:  

3 years international responsibility for solar collector and 15 years for glass tubes due to original quality problems

 

------------------------------------------------------------------------------------------------------------------------------------------------------------------  

 3.Heat-pipe solar collector  Installaion pictures:

SRCC,Solar Keymark Approved copper heat pipe solar collectors

SRCC,Solar Keymark Approved copper heat pipe solar collectors

SRCC,Solar Keymark Approved copper heat pipe solar collectorsSRCC,Solar Keymark Approved copper heat pipe solar collectorsSRCC,Solar Keymark Approved copper heat pipe solar collectorsSRCC,Solar Keymark Approved copper heat pipe solar collectorsSRCC,Solar Keymark Approved copper heat pipe solar collectors

 

Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service