Home > Products > Solar Water Heater Accessories >

Solar Water Heater Accessory Thermostatic Mixing Valve

Solar Water Heater Accessory Thermostatic Mixing Valve

Solar Water Heater Accessory Thermostatic Mixing Valve
CategoriesSolar Water Heater Accessories
AlbumView larger image
BrandInlightsolar
Typesuit for all kinds of solar water heater
PressurePressurized
Circulation Typeboth indrect and direct
Heating Systemsuit for all heating system
Connection Typeboth tubular and flat panel
InstallationFreestanding
Housing Materialcopper
CertificationCE
Unit PriceUS $ 20-30 / piece
FOB portShanghai/Ningbo
Terms of PaymentWestern Union, T/T
Update Time2019-11-19
Detail Information

Solar Water Heater Accessory Thermostatic Mixing Valve,1/2" and 3/4"

 

Feature:
1.Work pressure: 0.05Mpa—1Mpa
2.Ideal pressure: 0.1Mpa—0.5Mpa.Installation pressure release valve when exceed ideal pressure.
3.Standard pressure: Dynamic pressure0.3±0.02Mpa.
4.Cold water supply temperature: 4-29°C hot water supply temperature: 55-100°C. Advice water supply temperature55-70°C.
5.Out water temperature range: 20-50°C.
6.Set the safety temperature at 38°C.
7.Satety characteristic: If cold water supply fails ,flow rate will be reduced to virtually shut off which avoid the risk of scalding.
8.Temperature accuracy :Kept constant ±1°C for the setting.
9.Out water temperature stability :when the temperature of water intake kept constant, Cold water or hot water pressure change 50% , the outlet water temperature changes in ±2°C of setting temperature. The supply water pressure kept constant ;the temperature for hot water supply can be increases from 60°C to 75°C(5°C/min), the outlet water temperature changes in ±2°C of setting temperature.
10.Complies with the following standard:
ASMEA112.1812005/CSAB125.1-05,ASSE1016,EN1111,AS-4032.1 and QB2806-2006.

Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service